Filter
Top Products
17
Note: If you eject a CD while it is play-
ing and do not remove it from the CD
player, the stereo displays
NO Cd
. If
you eject a CD then remove it from the
CD player, the stereo shows the clock.
RESETTING THE
STEREO
If your stereo locks up or does not
work properly, use something pointed,
such as a straightened paper clip, to
press
RESET
for about 1 second.
TURNING THE
STEREO’S BEEP ON
AND OFF
The stereo normally beeps when you
press most buttons. To turn the ste-
reo’s beep on or off, eject a CD if one
is loaded (see “CD Player Operation”
on Page 21). Then press and hold
down
CD
for about 3 seconds until the
stereo beeps twice.
(illus)
(illus)
12-2152.fm Page 17 Wednesday, July 14, 1999 2:48 PM