Filter
Top Products
14
USING THE CONTROL PANEL
The stereo’s control panel must be in
place for the stereo to operate. When
you remove it, the display turns off
and the stereo cannot be used. This is
a simple, but effective security mea-
sure.
Any stored stations remain in memory
when the control panel is removed.
INSTALLING THE
CONTROL PANEL
1. Insert the left edge of the control
panel into the left edge of the
recess. The pins and holes in the
control panel interlock with the
pins and holes in the recess.
2. Gently push the right edge of the
control panel into the recess until
you hear a click.
REMOVING THE
CONTROL PANEL
1. Press
RLS
until you hear a click.
The control panel swings out.
2. Remove the control panel, then
store it in the supplied carry case.
Caution:
To keep the metal connect-
ing pins clean, do not touch the con-
necting pins in the recess or on the
back of the control panel.
(illus - show pins in recess holes)
(illus - show control panel swing)
(illus)
12-2152.fm Page 14 Wednesday, July 14, 1999 2:48 PM