Filter
Top Products
29
30
CQ-VD6503N
English
AV1/AV2
Note:
¡
You can set up the system so that the AV mode is not
selected (source skip). (
a
page 41) (AV set to NAVI
INPUT is not skipped even if is set to
)
¡
If no operation is performed for 10 seconds or is
touched, the operation buttons disappear.
¡
AV terminal is not used for the Panasonic car
navigation system. Refer to for setting.
(
a
System Upgrade Guidebook)
NAVI SETUP
ON
SOURCE SKIP
Preparation:
¡Connect an optional external device to the AV1/AV2.
Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are
connected.
AV Mode Selection
ASPECT
MUTE
TA
NAVI
TUNE
FOLDER
ALBUM
TRACK
SRC
VOL
ASP
P-MODE
PWR
TILT
CQ-VD6503N
SRC
Press [SRC] to change to the desired
mode.
[SRC]
Source Button
To switch Operation Screen ON, touch the center of
touch panel or press
[ENTER] on the remote control.
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
q
Touch
“
Source Button
”
.
d
w
Touch /
(AV1/AV2) on the
Source Selection
Screen.