Filter
Top Products
34
35
CQ-VD6503N
English
MEMORY CLEAR
Memory clearance
The state of all of the current memories are returned to
default settings.
Note:
¡The ID code is not deleted by executing memory clear.
: no memory clear.
The display returns to the previous one.
: clears the memory to default settings
appears when
is selected.
: no memory clear.
: proceed.
OK
CANCEL
YES
REALLY?
YES
NO
OTHER
Other settings
: operation sound (beep) OFF
: operation sound (beep) ON
default:
ON
ON
OFF
(Beep setting)
BEEP
: set to OFF if your car has no ACC posi-
tion.
: set to ON if your car has ACC position.
default:
Note:
¡
For a ACC-equipped car, select ON. The following
functions are available.
¡
The power is turned on automatically when inserting
a disc or magazine.
¡
selection disables turning on the power of the
main unit through the remote control.
: main unit-specific remote control
: rear monitor (option)-specific remote
control
default:
: LED indicator not blinking with ignition
key being at out-of-ACC
: LED indicator blinking with ignition key
being at out-of-ACC
default:
ON
ON
OFF
(Security LED setting)
SECURITY LED
FRONT
REAR
FRONT
(Remote control setting)
REMOTE CONTROL
OFF
OFF
ON
OFF
(Setting ACC selection ON and
OFF)
ACC SELECT
Caution
¡Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
OFF
ACC
IGN
Caution
¡Be sure to select OFF when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.
Caution
¡Record your registered ID code and keep it in a
secure location. (Fill in the ID code memo (
a
page 50).) If you forget it, you will be unable to use
the unit. In case you forget the ID code, please
consult your nearest Panasonic Service Centre.