Filter
Top Products
This is a guide book specific to system upgrading. Please refer to the operating instructions for basic operations,
menu operations, specifications, etc.
19
20
CQ-VD6503N
English
Settings
NAVI SETUP
(Navigation set up)
Navigation Setting
: Front Left/Right speaker
: Front Left only
: Front Right only
default:
BOTH
R ch
L ch
BOTH
(Navigation Speaker)
NAVI SP
Preparation: Connect the navi mute lead.
: unchanged
: – 20 dB
: – 30 dB
: no sound
default:
Note:
¡
You can set the navigation mute level when is
selected on .
NAVI INPUT
RGB
LEV 1
LEV 3
LEV 2
LEV 1
OFF
(Navigation mute level)
NAVI MUTE
Volume adjustment of the car navigation system.
: down, : up
[
]
(Navigation Volume)
NAVI VOLUME
Setting range: 0 to 40
default:
20
RADIO
INPUT/OUTPUT
DVDAUDIOSCREENUSER
CAMERA SETUP
Rear View Camera set up
Selection of the terminal that connects to the rear view
camera.
Preparation: Connect the reverse lead. (
a Installation
Instructions)
: unconnected
: connected to the CAMERA-IN
default:
Note:
¡
Make sure to select when no rear view camera is
connected.
Images through the rear view camera can be shown in
scale display mode.
: scale display off
: scale display on
default:
or : adjust
INPUT SELECT
Input selection
: connected to the RGB input cord, or a
car navigation system not connected
: connected to the AV1-IN
default:
: unconnected
: connected to the AV2-IN
default:
Note:
¡The audio output should be connected to the AV2-IN.
OFF
ON
OFF
(Video input for DVD Changer)
CH VIDEO INPUT
RGB
AV1
RGB
(Navigation Input)
NAVI INPUT
[]
(Scale adjustment)
SCALE ADJUST
OFF
ON
OFF
(Rear view camera scale)
SCALE
OFF
OFF
ON
OFF
(Rear view camera set up)
CAMERA