Filter
Top Products
CR-SRF100/CR-SRT100
17
PRESET
A preset is a channel number stored in memory that is easily called back by pressing a button. The CDU
can store up to 18 preset channels for quick retrieval. There are 6 buttons to store/recall preset channels
(numbered 1 ‡ 6). To afford 18 preset channel numbers, the CDU uses 3 groups of 6 presets. To access a
particular preset, you only have to select the group of preset values you want and then press the particular
preset button.
The preset memory (18 channels) is saved even if the battery power is lost.
OPERATING MODES
You are always in one of the 4 particular operating modes (SETUP, CHANNEL, CATEGORY, PRESET). The
only way to exit one mode is to press the appropriate button(s) to enter a different mode. For example:
• Press and release the [CATEGORY] button: Enters category mode.
• Press and release the [CHANNEL] button: Enters channel mode.
• Press and release the [PRESET] button: Enters preset mode.
• Simultaneously pressing the preset buttons [1] & [6]: Enters setup mode.
17233_SGould 08/15/02 14:46 Page 17