Filter
Top Products
200VW8 LCD
Advanced OSD Adjustment
7
Advanced OSD Adjustment
MENU
MENU
MENU
1. Front control panel
2. To Lock/Unlock OSD function
The OSD function can be locked by pressing button
for more than 10 seconds, the screen shows following
windows for 3 seconds.
Every time when you press any button, this message
appears on the screen automatically.
Locked OSD function can be released by pressing
button for more than 10 seconds. While press button
for OSD unlocked purpose, the screen will keep showing
OSD MAIN MENU LOCKED until OSD function unlocked and
screen automatically shows following window for 3 seconds.
3. Access Factory Mode
To hold and buttons, you can saw the LED
light flashing at this time. Then release the button and
Keep pressing the button. The monitor will power on
and LED light give out orange light. Press to bring up
OSD menu for confirmation as below:
If this message appeared, means monitor already entered
the factory mode.
AUTO POWER
AUTO
POWER
MENU
4. Entering Burn-in mode and others
If you access into factory mode, press or button to move
the cursor on the message bar of “ HUSDON 200VW8 V.32.”.
Then press to confirm, OSD menu will convert into
another format as below:
Move the cursor by button, and press the
to change the burn-in mode from Off to ON.
Leave factory mode by simply power off the monitor.
* If you only want to enter burn in mode, please don’t change
any other setting items as above listed.
* Unfortunately, if some settings has been changed by
unknown reasons or wrong operation. Please refer to the
chapter of “W/B Adjustment” to guide the operator how to
restore the default settings or do adjustment.
Appendix:
Explanation of above listed selections.
<>
MENU
MENU
War ning
or
button
<>
BIOS Revision Scaler IC Type Panel Type BIOS issued date
ATTENTION
OSD MAIN CONTROLS LOCKED
ATTENTION
OSD MAIN CONTROLS UNLOCKED
Selection Description
Burn in On/Off Enter Aging Mode
Auto Color Auto Color Adjustment
Con Contrast Adjustment
Bri Brightness Adjustment
Gain
ADC Gain Value Adjustment
(Auto adjustment by H/W when implement Auto Color function)
Offset
ADC Offset Value Adjustment
(Auto adjustment by H/W when implement Auto Color function)
sRGB sRGB Color Temperature Gain Value Adjustment
9300K 9300K Color Temperature Gain Value Adjustment
6500K 6500K Color Temperature Gain Value Adjustment
Color Update Save All of Color Temperature Gain Value
Factory Reset Memory Recall to Factory Default Settings
V.32 05/18/07
Off
Con 50
Bri 100
Gain R 88 G 91 B 88
Offset R 121 G 131 B 131
sRGB R 97 G 98 B 82
9300K R 91 G 94 B 95
6500K R 97 G 98 B 82
LM201WE3-TLH2TSUMU58WHJ
Fatory Reset
Color Update
AutoColor
Burn in
200VW8