Filter
Top Products
4
200VW8 LCD
Automatic Power Saving
Data Storage
Factory preset mode:
If you have VESA / DPMS compliance display card or software
installed in your PC, the monitor can automatically reduce
power consumption when power saving function active. And if
an input from keyboard, mouse or other devices is detected,
the monitor will automatically wake up. The following table
shows the power consumption and signaling of this automatic
power saving feature:
This monitor must comply with the Microsoft On Now
specification, with two power management states, as defined
by the VESA DPMS document. And must appropriately display
the DPMS states. Also comply with Environmental Protection
Agency (EPA) Energy Star and TCO03 power management
standard strictly.
ENERGY STAR is a U.S. Registered mark. AS AN ENERGY
STAR PARTNER, PHILIPS HAS DETERMINED THAT THIS
PRODUCT MEETS THE ENERGY STAR GUIDELINES OF
ENERGY EFFICIENCY.
This monitor has 18 factory-preset modes as indicated in the
following table:
Technical Data
2. Pin Assignment
2.1 PC analog video input with D - sub connector.
Connector type of analog signal cable :
D - Sub male with DDC2B pin assignment.
Blue connector with thumb-operated jackscrews.
Pin assignment :
2.2 PC digital video input with DVI-D connector.
Connector type of DVI-D signal cable :
DVI-D male with DDC2B pin assignment.
White connector with thumb-operated jackscrews.
Pin assignment :
Mode HSYNC VSYNC Video Pwr-cons. Indication Rec. time
Power-On On On active < 50W (<54W : for audio model) Green LED --
Off Off Off blanked < 1 W Amber LED < 5 s
DC Power Off N/A < 1 W LED Off
PIN
No.
Signal
Assignment
PIN
No.
Signal
Assignment
PIN
No.
Signal
Assignment
1 Red 6 Red GND 11 Sense (GND)
2 Green/ SOG 7 Green GND 12 Bi-directional
data
3 Blue 8 Blue GND 13 H/H+V sync
4 Sense (GND) 9 DDC +3.3V or
+5V
14 V-sync
5 N/A 10 Logic GND 15 Data clock
PIN
No.
Signal
Assignment
PIN
No.
Signal
Assignment
PIN
No.
Signal
Assignment
1 T.M.D.S.
data2-
9 T.M.D.S.
data1-
17 T.M.D.S.
data0-
2 T.M.D.S.
data2+
10 T.M.D.S.
data1+
18 T.M.D.S.
data0+
3 T.M.D.S.
data2 shield
11 T.M.D.S.
data1 shield
19 T.M.D.S.
data0 shield
4 No Connect 12 No Connect 20 No Connect
5 No Connect 13 No Connect 21 No Connect
6 DDC clock 14 +5V Power 22 T.M.D.S clock
shield
7 DDC data 15 Ground (for
+5V)
23 T.M.D.S.
clock+
8 No Connect 16 Hot plug
detect
24 T.M.D.S. clock-
Item Resolution H. freq/ V. freq Standard
1 640*350 31.469 KHz/70.086 Hz
IBM VGA 10H
2 720*400 31.469 KHz/70.087 Hz
IBM VGA 3H
3 640*480 31.469 KHz/59.94 Hz
IBM VGA 12H
4 640*480 35 KHz/67 Hz
MACINTOSH
5 640*480 37.5 KHz/75 Hz
VESA
6 800*600 35.0156 KHz/56.25 Hz
VESA
7 800*600 37.879 KHz/60.317 Hz
VESA
8 800*600 46.875 KHz/75 Hz
VESA
9 1024*768 48.363 KHz/60.004 Hz
VESA
10 1024*768 60.023 KHz/75.029
VESA
11 1280*1024 63.981 KHz/60.02 Hz
VESA
12 1280*1024 79.976 KHz/75.025 Hz
VESA
13 1440*900 55.469 KHz/59.901 Hz
VESA
14 1440*900 55.935 KHz/59.887
VESA
15 1440*900 70.635 KHz/74.984 Hz
VESA
16 1920*1080 66.587 KHz/60 Hz
CVT 2.3 MA-R
17 1680*1050 65.29 KHz/60 Hz
CVT 1.76 MW
18 1680*1050 65.29 KHz/60 Hz
CVT 1.76 MW-R