Filter
Top Products
10. REGULATORY STANDARDS
Note: All certificates must be raised under the name of Philips
10.1 Safety approvals
; CB report
; CE
; TUV GS
; TCO’03
10.2 Power management
; Energy Star
10.3 Certificates, Reports for the production start
When the first production of the monitor starts the following documents must be sent to Philips by mail. All
reports must be raised under “Philips” and have to show W0ZR model name .
;CB report
;CE
;FCC
;Service manual
11 RELIABILITY
11.1 Reliability of the monitor
The MTBF of the monitor has to be greater than 50.000 hours. The MTBF shall be calculated according to
the MIL Standard HBDK 217 E/F. The report about the calculation detail shall be provided on component
level before mass- production by TVI. The calculation shall be performed for a primary test/preset mode
under ambient temperature of 25°C.
12. CUSTOMIZATION
12.1 Identity Customization
Refer to SKU
12.2 EAN /SAP Identification
Refer to SKU
12.3 Plastic
The plastic material of the monitor must be PC-ABS (Front/ back) ABS-HB (base).
Plastic type and color is released as follows:
Refer to MakeUp sheet/ Graphic sheet
12.4 Definition of serial number
72 200VW8 LCD