Pioneer AVH-P6000DVD Car Video System User Manual


 
Introduction of setup
adjustments
1
1 Setupmenu display
Shows the setup function names.
1 Touch AUDIO MENU to display MENU.
MENU appears on the display.
# You can also display MENUby clicking the
joystick on theremote control.
2 Touch SETUP to display the setup func-
tion names.
The setup function names are displayed and
operable ones are highlighted.
# To return tothe previous display, touch BACK.
# To return tothe display of each source,touch
ESC.
Note
If you do not operatethe setup function within
about 30 seconds,the display is automatically re-
turned to the sourcedisplay.
Setting the AV input
You can connect an AV component to this unit
and display videos either on AV source or EXT
source.
Switch the AV input setting depending on the
connected AV components.
! Select VIDEO to watch video of a con-
nected component as AV source.
! Select EXT-V to watch video of a connected
video unit as EXT source.
% Touch AV input on the setup menu to
select the AV input setting.
Touch AV input until the desired setting is se-
lected.
! OFF No videocomponent connected
! VIDEO External videocomponent (such
as portable video player)
! EXT-V External video unit (suchas
Pioneer products availablein the future)
# EXT-V can be selected only whenexternal
video unit is connectedto this unit.
Setting for rear view
camera (back up camera)
CAUTION
Pioneer recommends the useof a camera
which outputs mirror reversed images,other-
wise screen imagemay appear reversed.
This unit features a function that automatically
switches to the rear view camera video (BACK
UP CAMERA IN jack) when a rear view cam-
era is installed on your vehicle. When the gear
shift is in REVERSE (R) position, the video
automatically switches to a rear view camera
video. (For more details, consult your dealer.)
! After you set up the rear view camera set-
ting, move the gear shift in REVERSE (R)
and confirm if a rear view camera video
can be shown on the display.
! If the display should be switched to a rear
view camera video by error while you are
driving for ward, change the rear view cam-
era setting.
! To end watching a rear view camera video
and return to the source display, press
V.ADJ.
Setup
En
97
Section
20
Setup