Filter
Top Products
Black plate (23,1)
<CRD3740-A>23
Introduction of audio
adjustments
1
2 3
1 Audio display
Shows the audio adjustments status.
2 Loudness indicator
Appears in the display when loudness is
turned on.
3 SW indicator
Shows when the subwoofer output is turned
on.
% Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)Loud (loudness)
Phase (subwoofer)80 (subwoofer setting)
SLOPE (subwoofer slope)F-HPF (front
high pass filter)R-HPF (rear high pass filter)
# When the RCA output setting is P/O :FUL,
Phase, 80 and SLOPE change to NoFAD (non
fading) function.
# When the front high pass filter is turned on,
you can select F-SLP (front high pass filter slope).
# When the rear high pass filter is turned on,
you can select R-SLP (rear high pass filter slope).
# To return to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD.
Press AUDIO until FAD appears in the display.
# If the balance setting has been previously ad-
justed, BAL will be displayed.
2 Press a or b to adjust front/rear speak-
er balance.
Each press of a or b moves the front/rear
speaker balance towards the front or the rear.
FAD :F25 FAD :R25 is displayed as the front/
rear speaker balance moves from front to rear.
# FAD : 0 is the proper setting when only two
speakers are used.
3 Press c or d to adjust left/right speaker
balance.
When you press c or d, BAL : 0 is displayed.
Each press of c or d moves the left/right
speaker balance towards the left or the right.
BAL :L25 BAL :R25 is displayed as the left/
right speaker balance moves from left to
right.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select Loud.
Press AUDIO until Loud appears in the dis-
play.
2 Press a to turn loudness on.
Loud :ON appears in the display.
3 Press b to turn loudness off.
Loud :OFF appears in the display.
Audio Adjustments
En
23
English
Section
07
HHHHHHHHHHHHHH