Filter
Top Products
Black plate (30,1)
<CRD3740-A>30
Button Display Indicator Position
c Front-L
Front seat left
d Front-R
Front seat right
1 Press DSP to select the position selec-
tor.
Press DSP until Posi appears in the display.
# If the position selector has been previously set
to a listening position then the title of that pre-
viously selected listening position will be dis-
played instead of Posi.
2 Press c, d, a or b to select a listening
position.
Press one of these, c, d, a or b to select a lis-
tening position as listed in the table.
# To cancel the selected listening position,
press the same button again.
Using automatic sound
levelizer
During driving, noise in the car changes ac-
cording to the driving speed and road condi-
tions. The automatic sound levelizer (ASL)
monitors such varying noise and automati-
cally increases the volume level, if this noise
becomes greater. The sensitivity (variation of
volume level to noise level) of ASL can be set
to one of five levels.
1 Press DSP to select ASL.
Press DSP until ASL appears in the display.
2 Press a to turn ASL on.
ASL:MID appears in the display.
# To turn ASL off, press b.
3 Press c or d to select the desired ASL
level.
Each press of c or d selects ASL level in the
following order:
LOW (low)MidL (mid-low)MID (mid)
MidH (mid-high)HIGH (high)
Digital Signal Processor
En
30
Section
08
HHHHHHHHHHHHHH