Filter
Top Products
Black plate (28,1)
<CRD3740-A>28
Display Effect
STUDIO Studio
JAZZ CLUB Jazz club
CLUB Club
BBE BBE
1 Press DSP to select the sound field con-
trol.
Press DSP until SFC appears in the display.
# If the sound field control has been previously
set to a sound field program then the title of that
previously selected sound field program will be
displayed instead of SFC.
2 Press c or d to select a sound field pro-
gram.
Press c or d until the desired setting appears
in the display.
Adjusting BBE sound level
With BBE sound processing technology, you
can adjust the level of BBE.
1 Recall BBE.
See Recalling sound field programs on the pre-
vious page.
2 Press a or b to adjust the level of BBE.
Each press of a or b increases or decreases
the level of BBE.
+4 4 is displayed as the level is increased
or decreased.
Using the graphic equalizer
The graphic equalizer lets you adjust the
equalization to match car interior acoustic
characteristics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display Equalizer curve
S-Bas (SPR-BASS) Super bass
PWRFL (POWERFUL) Powerful
NTRL (NATURAL) Natural
VOCAL (VOCAL) Vocal
CTM1 (CUSTOM 1) Custom 1
CTM2 (CUSTOM 2) Custom 2
FLAT (FLAT) Flat
! CTM1 (CUSTOM 1) and
CTM2 (CUSTOM 2) are adjusted equalizer
curves that you create. Adjustments can be
made with a 9-band graphic equalizer.
! When FLAT (FLAT) is selected no supple-
ment or correction is made to the sound.
This is useful to check the effect of the
equalizer curves by switching alternatively
between FLAT (FLAT) and a set equalizer
curve.
1 Press DSP to select the graphic equali-
zer.
Press DSP until PWRFL (POWERFUL) appears
in the display.
# If the graphic equalizer has been previously
set to an equalizer curve other than
PWRFL (POWERFUL) then the title of that pre-
viously selected equalizer curve will be displayed
instead of PWRFL (POWERFUL).
2 Press c or d to select an equalizer
curve.
Each press of c or d selects equalizer curves
in the following order:
S-Bas (SPR-BASS)PWRFL (POWERFUL)
NTRL (NATURAL)VOCAL (VOCAL)
Digital Signal Processor
En
28
Section
08
HHHHHHHHHHHHHH