Filter
Top Products
Black plate (33,1)
<CRD3740-A>33
2 Press c or d to swtch RCA output set-
ting.
Pressing c or d will switch between P/O :S/W
(subwoofer) and P/O :FUL (non fading) and
that status will be displayed.
Selecting the digital
attenuator
When listening to a MD or other source on
which the recording level is high, setting the
equalizer curve level to high may result in dis-
tortion. You can switch the digital attenuator
to low to reduce distortion.
! Sound quality is better at the high setting
so this setting is usually used.
1 Press FUNCTION to select D.ATT.
Press FUNCTION repeatedly until D.ATT ap-
pears in the display.
2 Press c or d to switch D.ATT high or
low.
Pressing c or d will switch between
D.ATT: HI (high) and D.ATT:LOW (low) and
that status will be displayed.
Switching the telephone
muting/attenuation
Sound from this unit is muted or attenuated
automatically when a call is made or received
using a cellular telephone connected to this
unit.
1 Press FUNCTION to select Mute.
Press FUNCTION repeatedly until Mute ap-
pears in the display.
2 Press c or d to select the desired set-
ting.
Each press of c or d selects settings in the
following order:
Mute (muting) 10dB ATT (attenuation)
20dB ATT (attenuation)
20dB ATT has a stronger effect than
10dB ATT.
Notes
! The sound turns off, MUTE or ATT is displayed
and no audio adjustments, except volume
control, are possible.
! Operation returns to normal when the phone
call is ended.
Initial Settings
En
33
English
Section
09
HHHHHHHHHHHHHH