Filter
Top Products
Black plate (27,1)
<CRD3740-A>27
Using the digital signal
processor
2
3 4 6
5
1
The digital signal processor lets you control
many aspects of sound output including
equalization, sound field control and listening
position.
1 Equalizer curve
Shows which equalizer preset is currently
selected.
2 Sound field program indicator
Shows which sound field program is cur-
rently selected.
3 CUSTOM indicator
Shows when custom equalizer curve is pre-
sently selected.
4 ASL indicator
Shows when the automatic sound levelizer
is turned on.
5 DSP display
Shows the DSP status
6 Position indicator
Shows which listening position is currently
selected.
% Press DSP to display the DSP function
names.
Press DSP repeatedly to switch between the
following functions:
SFC (sound field control)
PWRFL (POWERFUL) (graphic equalizer)
50 (9-band graphic equalizer)Posi (posi-
tion selector)ASL (automatic sound leveli-
zer)
# To return to the display of each source, press
BAND.
Note
If you do not operate the DSP function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using sound field control
and BBE sound
SFC (sound field control) incorporate three
programs for reproducing typical sound fields
of a studio, jazz club or club. This function
makes it possible to reproduce the realistic
sound fields of the three programs in your car.
With BBE, playback very close to the original
sound can be obtained by correction with a
combination of phase compensation and
high-range boost for the delay of the high-fre-
quency components and the amplitude devia-
tion occurring during playback. This function
makes it possible to reproduce the dynamic
sound field as if you are listening to a live per-
formance.
Note
Manufactured under license from BBE Sound,
Inc. The mark BBE is a trademark of BBE Sound,
Inc.
Recalling sound field programs
Here is a list of the sound field programs:
Digital Signal Processor
En
27
English
Section
08
HHHHHHHHHHHHHH