Filter
Top Products
Black plate (35,1)
<CRD3740-A>35
Understanding built-in MD
player error messages
When problems occur during MD play an
error message may appear on the display. If
an error message appears on the display refer
to the table below to see what the problem is
and the suggested method of correcting the
problem. If the error cannot be corrected, con-
tact your dealer or your nearest Pioneer Ser-
vice Center.
Message Cause Action
Blank MD Blank disc is in-
serted.
Replace disc.
TEMP MD player over-
heated.
Discontinue play
until the machine
temperature drops.
ERROR-11, 12,
17, 30
Dirty disc Clean disc.
ERROR-11, 12,
17, 30
Scratched disc Replace disc.
ERROR-01, 11,
12, 17, 30, A0,
A1
Electrical or me-
chanical
Turn the ignition
ON and OFF, or
switch to a differ-
ent source, then
back to the MD
player.
ERROR-20, 21 Track information
cannot be read.
Reload the MD.
ERROR-20, 21,
24
There is some-
thing wrong with
the MD.
Replace disc.
ERROR-23 The MD contains
recorded infor-
mation other
than music.
Replace disc.
ERROR- MD play not pos-
sible.
Replace disc.
MD player and care
! Use MDs bearing this mark. Using a disc
other than a music MD may result in da-
mage to this unit.
! Do not open the MD shutter by hand. For-
cing it open may result in damage.
Shutter
! Be sure to stick labels supplied with MDs
in the specified location. Failing to do this,
or sticking one label on top of another may
make it impossible for the MD to be re-
moved.
Additional Information
En
35
English
Appendix
HHHHHHHHHHHHHH