Filter
Top Products
Installation
24
Peel the protective material from the adhesive strips (see
Figure 10
, on page 23)
and press the rubber Cover/Tail fi rmly into place on the vehicle.
Double check that the location of the antenna and rubber cover/tail are correct, and
continue to press fi rmly down on the Rubber Cover/Tail for another 30 seconds.
At room temperature (68° F), maximum adhesion usually occurs within 72 hours.
During this period, avoid car washes and other contact with the antenna and the
Rubber Antenna Cover/Tail.
Cable Routing
After you have mounted the antenna you can route the antenna cable to the SIRIUS
Vehicle Dock. Separate antenna cable routing procedures are provided for each type of
vehicle: Sedan/Coupe, Pickup Truck, SUV/Mini-Van and Convertible.
Note that additional breakout illustrations for each step of the antenna cable routing
procedures can be found on the SIRIUS website at
http://www.sirius.com. Click on the
Install/Activate link and then follow the link for the Car Installation Tips.
4.
5.