Filter
Top Products
Installation
62
Step 9: Route and hide the cable through the vehicle to the Vehicle Dock
Hide the FEA cable by properly routing it to your SIRIUS Vehicle Dock (see
Figure 45
).
Use the cable guides to hold the cable in place until it reaches the inner trim or moulding
at the edge of the window. Take advantage of any existing cable channel or wiring conduit
and route the cable around the passenger compartment to the Vehicle Dock. Take care
not pull the cable across sharp edges that could damage it, and keep it away from areas
where it might entangle feet. Coil and secure any excess antenna cable in a location
where it can be hidden and secured (such as under the carpet or fl oor mat).
Plug the FEA cable into the Vehicle Dock’s FM O
UT connector (see
Figure 37
, on
page 58).
Figure 45