Filter
Top Products
Installation
58
Step 4: Temporarily plug the FEA into the Vehicle Dock’s FM OUT connector
See
Figure 37
.
Step 5: Tune your vehicle’s FM radio to a channel that’s not being used in your area
Use your vehicle radio’s
Tune
function (not the
Scan
function) to fi nd an FM
channel (between 88.1MHz and 107.9MHz) that is not broadcasting in your area.
If you’re not sure which FM channels are not broadcasting in your home or
travel cities, you can also go to
http://sirius.com/fmchannel and search for a
suggested FM channel based on your zip code.
• Once you have located an FM channel that is not broadcasting in your area, save it as
a preset on your vehicle radio. This will become your SIRIUS preset.
Step 6: Set Your Starmate ST5’s FM transmitter to the same FM channel
a. Dock your Starmate ST5 and turn its power ON. Wait for the
Channel Update
to fi nish before pressing any buttons.
b. Press and hold the FM Presets button (see
Figure 38,
opposite). The
FM P
RESETS screen will appear, with FM1 highlighted. FM1 is factory-set to
88.1MHz. This may not be the best frequency for your area (see
Figure 39
,
opposite).
FM OUT
ANT
FM OUT
Jack
Vehicle Dock
(Right Side)
Cable From
FM Extender Antenna
Figure 37