Sony LMD-3250MD Car Video System User Manual


 
Adjustment Using the Menus
25
COLOR TEMP/SPACE menu
The COLOR TEMP/SPACE menu is used for adjusting
the picture white balance or color space.
You need to use the measurement instrument to adjust
the white balance.
Recommended: Konica Minolta color analyzer CA-210
USER CONTROL menu
The USER CONTROL menu is used for adjusting the
picture.
Items that cannot be adjusted depending on the input
signal are displayed in black.
For details of input signals and adjustable/setting items,
see page 14.
For the video input
Submenu Setting
COLOR TEMP Selects the color temperature from
among “HIGH”, “LOW” or
“USER” and “LOW2” setting.
MANUAL
ADJUSTMENT
If you set the COLOR TEMP to
USER setting, the item displayed is
changed from black to white, which
means you can adjust the color
temperature.
The set values are memorized.
ADJUST GAIN: Adjusts the
color balance (GAIN).
ADJUST BIAS: Adjusts the
color balance (BIAS).
COPY FROM: If you select
“HIGH”, “LOW” or
“LOW2”, the white balance
data for the selected color
temperature will be copied
in the “USER” setting.
COLOR SPACE Selects the color space either ITU-
709 or OFF. OFF sets the color
space to the original color
reproduction of the LCD panel.
COLOR TEMP: xxxxxx
MANUAL ADJUSTMENT:
ADJUST GAIN:
ADJUST BIAS:
COPY FROM: xxx
COLOR SPACE: x
COLOR TEMP/SPACE
Submenu Setting
AUTO CHROMA/
PHASE
Adjusts color intensity (CHROMA)
and tones (PHASE).
AUTO ADJ VALUE: Selects
ON or OFF of the auto
adjustment. When you set
to OFF, this parameter is
reset to the factory setting.
When you set to ON, the
automatically adjusted value
is enabled.
START: The auto adjustment
starts when you display the
color bar signals (Full/
SMPTE/EIA) on the screen
and press the ENTER
button. After adjusting the
color intensity, press the
MENU button to clear the
adjustment screen. After the
adjustment is done correctly,
the AUTO ADJ VALUE is
automatically set to ON.
AUTO CHROMA/PHASE
AUTO ADJ VALUE: xx
START:
USER CONTROL 1/3
SUB CONTROL
CONTRAST: x
BRIGHTNESS: x
CHROMA: x
PHASE: x
APERTURE: x
BACKLIGHT: x
USER CONTROL 2/3
PICTURE CONTROL
ACC: xx
CTI: x
V SHARPNESS: x
INPUT SETTING
SHIFT H: xxx
SHIFT V: xx
USER CONTROL 3/3