Filter
Top Products
14
Changing the player and
monitor settings
Turning off the speaker sound
from the player
1 Press (MENU) repeatedly to select
“Speaker.”
Each time you press (MENU), the setting
screen changes as follows:
Speaker t IR HP t FM Modulator t
Picture t Brightness t Color t
Hue* t Dimmer t Video Adjust t
Mode t Blue Back t Menu Off
* “Hue” appears only when the NTSC colour
system is selected (page 13).
2 Press (VOL) (+) or (VOL) (–) to select
“off.”
MENUREVERSEVOL +/–
Speaker; On
Press
+
/
–
or MENU.
To deactivate the cordless
headphones
1 Press (MENU) repeatedly to select “IR
HP.”
2 Press (VOL) (+) or (VOL) (–) to select
“off.”
Setting the FM modulator
You can transmit the audio signals to the FM
radio and output the signals from the car
stereo. Do the procedure below to turn on or
off the FM modulator and select the frequency.
1 Press (MENU) repeatedly to select “FM
Modulator.”
2 Press (VOL) (+) or (VOL) (–) to select
“Low,” “Middle,” “High,” or “Off.”
Select the FM modulator output level
according to the input sensitivity of the car
stereo’s radio.
3 To select the frequency, press
(REVERSE).
The “Frequency” screen appears.
4 Press (VOL) (+) or (VOL) (–) to select the
frequency.
The settable range is 88.3 MHz to 89.9 MHz,
in 0.2 MHz steps.
Frequency 88.3MHz
Press
+
/
–
, MENU or Rev.
IR HP; On
Press
+
/
–
or MENU.