Filter
Top Products
48
ADJUSTING OUTPUT LEVEL OF THE CENTER, RIGHT REAR, LEFT
REAR, FRONT EFFECT SPEAKERS AND SUBWOOFER
If desired, you can adjust the sound output level of the each
speaker even if the output level is already set in “SPEAKER
BALANCE ADJUSTMENT” on pages 29 to 31.
Note: These adjustments can be made only when the effect
sound is on. If none of the indicators , ,
and are illuminated on the display
panel, press the EFFECT button on the front panel or the
EFFECT ON/OFF key on the remote control transmitter so that
at least one of those indicators lights up on the display panel.
PRO LOGIC
DIGITAL
DSP
1 Set the PARAMETER/SET MENU switch on the remote
control transmitter to the PARAMETER position.
2
3 Press once or more until the name of speaker(s) whose
level you want to adjust appears on the display.
Whenever pressed, the selection changes as the above chart
shows.
* Pressing the key on the remote control transmitter
changes the selection in the reverse order.
4 Adjust the level on the selected speaker(s).
5 Repeat step 2 and 3 to make adjustments on other
speaker(s).
CENTER
LS/RS
FRONT
SWFR
(Center speaker output level)
(Left and right rear speaker output level)
(Front effect speaker output level)
(Subwoofer output level)
Method of adjustment
This adjustment can be made only by using the remote control transmitter.
Note: Be sure to use the remote control transmitter with the lid open.
LEVEL
LEVEL
PARAMETER
SET MENU
or