Filter
Top Products
64
LEARNING NEW CONTROL FUNCTIONS (When the lid is open)
This is a learning remote control transmitter. The shaded keys in the illustration shown below can be programmed to “learn”
control functions from other remote control transmitters. By learning key-functions from other remote control transmitter, this unit can
then be used in place of one or more other remote control transmitters, thus making operation of your various audio and video
components more convenient.
Some of the “learning-capable” keys are originally empty and others have already been preset with functions to control this unit and
other Yamaha components. You can store new functions to them (in place of preset functions) as desired.
* See page 70 for the learning method.
* See page 72 for clearing a learned function (or all learned functions).
Note
If the memory capacity of the remote control transmitter becomes full, no further learning is possible even if some learning-capable
keys are not occupied with new functions. If, for example, you store Yamaha codes only into this remote control transmitter, up to
about 50 functions can be stored. Store new functions to the learnable-capable keys which are useful for you.
Keys which can have three functions (1, 2, 3, 4)
In the “Learning-capable” keys, the keys numbered 1–4 in the
illustration at left can have three functions. This is because they
have three memory areas (A, B and C). (One function per area.)
You can store new functions into the area B and C, and use three
functions on a key by switching the memory areas with the A/B/C
switch. (Area A cannot learn a new function.)
To use these keys:
1. Before using a key, select the area A, B or C of the key on which
the function you want to use is stored by using the A/B/C switch.
2. Press the key.
The original factory settings of these keys are as follows.
A
Preset with
functions for
controlling a
Yamaha tape deck.
Preset with
functions for
controlling a
Yamaha CD player.
(STOP is empty.)
Preset with
functions for
controlling
a Yamaha tuner.
Preset as the DSP
program selector
keys
B
Empty
Preset with functions
for controlling a
Yamaha LD player.
(DISC is empty.)
Empty
Preset as the DSP
program selector
keys
C
Empty
Empty
Empty
Preset as the DSP
program selector
keys
1
2
3
4
The position of A/B/C switch
Note
The area A of all keys cannot learn new functions. To store new
functions to these keys, store them onto the area B or C.
Empty keys (1)
These are empty keys. Each key can learn a function from another
remote control transmitter.
For example, the TV key is useful for storing the function of your
TV’s power switch, and the VCR key can be used for your VCR’s
power switch.
MD/TAPE 1
A/B
REC/PAUSE
BA
A
CD
TUNER
VCR 1
B
LD
TAPE 2 MON
/EXT. DECODER
PHONO
EFFECT
ON/OFF
TV/DBS
DVD/VCR 3
V-AUX
C
DIR
DISCSTOP
TRANSMIT
/LEARN
LEARNCLEAR MACRO
PRESET
A/B/C/D/E
CHURCH
1 2 3
CLUB
JAZZ
VIDEO 1
CONCERT
THEATER 1
MOVIE
THEATER 2
MOVIE
VIDEO 2
CONCERT
THEATER
TV
CONCERT
ROCK
TAINMENT
ENTER-
4 5 6
HALL 1 HALL 2
7 8 9
PARAMETER
SET MENU
SLEEP
ON SCREEN
LEVEL
TEST
MASTER VOLUME
TV
VCR
STANDBY
SYSTEM
POWER ON
10 11
MUTE
REMOTE CONTROL
TRANSMITTER
1
VCR 2
1
2
3
4
/
DTS
SURROUND
12
A/B/C switch
Lid is open.
*
1
: These buttons are used for learning a new function
or clearing a learned function (or all learned
functions). For details, refer to pages 70 to 72 .
*
1