3Com Telephone Local User Interface Menus 175
6 VCX Config
Menu
Alt Dnld Servr – The IP address of a secondary server that stores
the telephone’s image.
Set VLAN Config – Used to enable or disable VLAN
configuration.
■ VLAN Enable – 1
You are prompted to enter the VLAN ID. A valid VLAN ID is in
the range of 0 through 4095. Press the pound key (#) to store
it in memory.
■ VLAN Disable - 0
7 Spare Reserved for future use.
8 Test LED & LCD Turns on all LEDs for 5 seconds, then fills every pixel on the
display panel for 5 seconds.
9 Test – Buttons Puts the telephone in the button test state. Press any telephone
button to see a description of the button’s function. To return to
the main menu, you must press the menu button twice:
■ On the 3Com 3102 Business Telephone:
■ On an 3Com 2102 or 2102-IR Business Telephone:
■ On an 3Com 3101 or 3101SP Basic Telephone:
■ On an 3Com 2101 Basic Telephone:
0 EEPROM-Default
Restores the phone to default settings by clearing these
configured settings:
IP Information — My IP, Subnet Mask, Gateway IP, NCP-IP, and
the Alt Download Server IP return to 255.255.255.255.
NCP MAC address — The NCP MAC address returns to
ff:ff:ff:ff:ff:ff.
SIP Parameters — All SIP specific parameters will be set to
default 0xffff (data parameters) or 255.255.255.255 for IP
addresses.
NOTE: If you select this option you are prompted to verify your
action before the system clears the EEPROM.
(continued)
Table 33 LUI Menu Items (continued)
Menu Option Description
