CrossPoint / MAV Matrix Switchers • Operation
3-2
Operation
N
The operation of the CrossPoint 450 Plus, CrossPoint Ultra, and MAV Plus
switchers is very similar. There are two exceptions:
• The video selection button is labeled “RGBHV” on the CrossPoint models
and “Video” on the MAV Plus switchers.
• The MAV Plus switchers do not offer RGB delay switching.
Front Panel Controls and Indicators
The front panel controls (figure 3-1 through figure 3-3) are grouped into two sets.
The input and output buttons are grouped on the left side of the control panel. The
controlbuttonsandvideo/audio(I/O)selectionbuttonsaregroupedontheright
side of the panel.
N
While the number of inputs and outputs varies depending on the size and model
of the matrix switcher, there are only three front panel arrangements: 12 input
buttons by 8 output buttons (figure 3-1), 16 by 16 (figure 3-2), and 32 by 32
(figure 3-3). See the table below to identify the front panel arrangements used by
each switcher model.
On smaller matrix switchers, the larger-numbered buttons are not used for
input and output selection, although they are used to select and indicate preset
numbers, indicate the input audio level, and indicate the output audio volume.
Switcher model
Panel
32 x 3212 x 8 Figure
CrossPointUltra
84,88,124,128
MAVPlus
88,128
CrossPointUltra
MAVPlus
816,1212,1616
CrossPoint450Plus
MAVPlus
2412,2424,3216,3232
3-2
3-3
3-1
16 x 16
Thelarge,illuminatedpushbuttonscanbelabeledwithtextand/orgraphics.The
buttons can be set to provide amber background illumination all the time or the
backgroundilluminationcanbeturnedoff(see“Backgroundillumination”,on
page3-54.Whenselected,thebuttonsblinkorarelitatfullintensity,dependingon
the operation.
AUDIO
VIDEO
I/O
CONTROL
ENTER PRESET
VIEW
ESC
INPUTS
1
2
3 4
5
6 7 8
9
10
11 12
OUTPUTS
1
2
3 4
5
6
7 8
CONFIG
ULTRA-WIDEBAND MATRIX SWITCHER WITH ADSP
™
CROSSPOINT
ULTRA
SERIES
8 6 5 4 7
1
2
3
Figure 3-1 — Front panel, CrossPoint Ultra 128 HVA
