3-37
CrossPoint / MAV Matrix Switchers • Operation
4. One at a time, press and holdtheOutput3buttonandthentheOutput4
button (figure 3-53) for approximately 2 seconds until each button begins to
blink.Theoutput3andoutput4videoandaudiosignalsaremuted.
3
4
3
4
The button blinks amber to
indicate that the RGBHV or Video
and audio outputs are muted.
The button blinks amber to
indicate that the RGBHV or Video
and audio outputs are muted.
Mute outputs one at a time.
2 seconds
2 seconds
Press and hold the Output 3 button.
Press and hold the Output 4 button.
Figure 3-53 — Mute the outputs
N
If both RGBHV/video and audio are selected, the mute action toggles both
the video and audio outputs. If either the video output or the audio output is
already muted, the unmuted output is muted and the muted output is unmuted.
N
If both RGBHV/video and audio are selected and only video is muted, the
output button flashes between green and amber. If only audio is selected, the
output button flashes between red and amber.
5. One at a time, press and holdtheOutput3buttonandthentheOutput4
buttons(gure3-54)forapproximately2secondsuntileachbuttonreturns
toitspreviousstate.Theoutput3andoutput4videoandaudiosignalsare
unmuted.
3
4
3
4
Unmute outputs one at a time.
2 seconds
2 seconds
Press and hold the Output 3 button.
Press and hold the Output 4 button.
The button returns to its previous indication
(either lit green, background illuminated, or unlit)
to indicate that the output is unmuted.
The button returns to its previous indication
(either lit green, background illuminated, or unlit)
to indicate that the output is unmuted.
Figure 3-54 — Unmute the outputs
N
If both RGBHV/video and audio are selected, the unmute action toggles both
the video and audio outputs. If either the video output or the audio output is
already unmuted, the muted output is unmuted and the unmuted output is
muted.
6. PressandreleasetheViewbuttontoexitView-only mode (figure 3-55).
All input buttons and output buttons
return to unlit or background illumination.
VIEW
Press the View button
to exit View-Only mode.
The View button returns to
unlit or background
illumination.
Figure 3-55 — Press the View button to exit View-only mode
