Extron Electronics MAV Plus Series Manual

A SERVICE OF

next previous

Operation, cont’d

CrossPoint / MAV Matrix Switchers • Operation

3-20

Viewing a conﬁguration

The current conﬁguration can be viewed using the front panel buttons. The

View-only mode prevents inadvertent changes to the current conﬁguration.

View-onlymodealsoprovidesawaytomutevideoandaudiooutputs(see“Muting

andunmutingvideoand/oraudiooutputs”onpage3-35.

View the current conﬁguration as follows:

1. PresstheEscbuttontoclearanyinputbuttonindications,outputbutton

indications, or control button indications that may be on.

2. PressandreleasetheViewbutton.Allofthebuttonslightforoutputsthatare

not tied as follows:

• Amber: No tied video or audio input

• Green: No tied video input

• Red: No tied audio input

3. Selectvideo,audio,orbothtoviewbypressingtheRGBHV

(CrossPointswitchers)orVideo(MAVPlusswitchers)buttonand/orthe

Audio button.

4. Selectthedesiredinputoroutput(s)whosetiesyouwishtoviewbypressing

the input and output buttons.

N • WhenyouenterView-only mode, the output buttons light for all outputs

without ties. Likewise, when you press an output button for which there are

no ties, the output buttons light for all outputs without ties.

• Toseealltiesofthecurrentconguration,pressandreleaseeachinputand

output button, one at a time, with the RGBHV (CrossPoint switchers) or

Video (MAV Plus switchers) button and the Audio button lit.

• InView-only mode, you can view video and audio, video-only, or audio-only

ties. Pressing and releasing the RGBHV (CrossPoint switchers) or Video

(MAV Plus switchers) button and the Audio button toggles each selection on

and off.

• Whenyouviewvideoandaudioties,theRGBHV (CrossPoint switchers) or

Video (MAV Plus switchers) button is lit green and the Audio button is lit

red. After you select an input or output, the output buttons light different

colors to show where video and audio ties are not the same (audio is broken

away)

Amber = video and audio

Green = video only

 Red = audio only

• After30secondsoffrontpanelinactivity,View-only mode automatically

deselects.