4-18 COOLING SYSTEM
Radiator Fan Switch, Water Temperature Sensor
CAUTION
The fan switch or the water temperature sensor
should never be allowed to fall on a hard surface.
Such a shock to their parts can damage them.
Radiator Fan S witch Removal
•
Drain the coolant (see Cooling System in the Periodic
Maintenance chapter).
•
Remove:
Radiator Fan Switch Lead Connector [A]
Radiator Fan Switch [B]
Radiator Fan Switch Installation
•
Tighten:
Torque - Radiator Fan Switch : 18 N·m (1.8 kgf·m, 13 ft·lb)
•
Fill the coolant (see Cooling System in the Periodic Main-
tenance chapter).
Radiator Fan Switch Inspection
•
Refer to the Electrical System chapter for the Radiator
Fan Switch Inspection.
Water Temperature Sensor Removal
•
Refer to the Fuel System (DFI) chapter.
Water Temperature S ensor [ A]
Water Temperature Sensor Inspection
•
Refer t o the Electrical System chapter for the Water Tem-
perature Sensor Inspection.
