A SERVICE OF

logo

FINAL DRIVE 11-9
Drive Chain
Turn pin holder until riveting pin touches link pin.
Turn wrench clockwise until tip of riveting pin hits of link
pin.
Rivet it.
Some work for t he other link pin.
After staking, check the staked area of the link pin for
cracks.
Measure the outside diameter [A] of the link pin and link
plates width [B].
Link Pin Outside Di ameter
Standard: 5.6 6.0 mm (0.22 0.24 in.)
Link Plates Outside Width
Standard: 17.45 17.60 mm (0.687 0.693 in.)
If the reading exceeds the specified length, cut and rejoin
the chain again.
Check:
Movement of the Rollers
Chain Slack