A SERVICE OF

logo

ELECTRICAL SYSTEM 16-83
Fuse
30 A Main Fuse Removal
Remove:
Right Side Cover (see Frame chapter)
30 A Main Fuse Connector [ A]
Pull out the main fuse [B] from the starter relay with needle
nose pliers.
Junction Box Fuse Removal
Remove the seats (see Frame chapter).
Unlock the hook to lift up the lid [A].
Pull the fuses [B] straight out of the junction box with nee-
dle nose pliers.
Fuse Installation
If a fuse fails during operation, inspect the electrical sys-
tem to determine the cause, and then replace it with a
new fuse of proper amperage.
Install the junction box fuses on the original position as
specified on the lid.
15 A ECU Fuse Removal
Remove:
Seats (see Frame chapter)
Unlock the hook to pull the lid [A].
Pull out the ECU Fuse from the fuse box.