A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 51
accept mode always
Enables the tunneling server to always accept tunneling
connections.
accept mode any character
Enables the tunneling server to accept tunneling connec-
tions only when a
accept mode disable
Disables accept mode tunneling.
accept mode modem control asserted Enables the tunneling server to accept tunneling connec-
tions when the modem
accept mode modem emulation
Enables modem emulation for accept mode tunneling.
accept mode start character
Enables accept mode tunneling when the configured start
character
aes decrypt key <hexadecimal>
Sets the accept tunnel AES decrypt key with up to 16
bytes.
aes decrypt key text <text>
Sets the accept tunnel AES decrypt key with up to 16
bytes.
aes encrypt key <hexadecimal>
Sets the accept tunnel AES encrypt key with up to 16
bytes.
aes encrypt key text <text>
Sets the accept tunnel AES encrypt key with up to 16
bytes.
block network disable
Forwards (tunnels) network data in accept mode tunne-
ling.
block network enable Discards all data coming in from the accept mode tunnel
before forwarding
block serial disable
Forwards (tunnels) serial data in accept mode tunneling.
block serial enable
Discards all data coming in from the serial interface before
forwarding
clrscrn
Clears the screen.
default accept mode
Restores the default accept mode as "always".
default protocol
Restores the default protocol as "TCP".
default tcp keep alive
Restores the default 45 second accept mode TCP keep
alive timeout.
email connect <number>
Sets an email profile to use to send an email alert upon
establishing
email disconnect <number>
Sets an email profile to use to send an email alert upon
closing
exit
Returns to the tunnel level.
flush serial disable
Characters already in the serial data buffer are retained
upon establishing
flush serial enable
Flushes the serial data buffer upon establishing an accept
mode tunneling
kill connection
Disconnects the active accept mode tunneling connection.
local port <number>
Sets the port to use for accept mode tunneling.
no aes decrypt key
Removes the accept tunnel AES decrypt key.
no aes encrypt key
Removes the accept tunnel AES encrypt key.
no email connect
Discontinues sending email alerts upon establishing an
accept mode tunnel.
no email disconnect Discontinues sending email alerts upon closing an accept
mode tunnel.
no local port
Uses the default port number as the local port for accept
mode tunneling.
no tcp keep alive
Disables the accept mode TCP keep alive timeout.
output select
Enters the next lower level.