A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 73
kill <line>
Kills the current print job on the specified line.
show <line>
Displays lpd status for the specified line.
show history
Displays the last 20 commands entered during the current
CLI session.
lpd 1 (config-lpd:1) level commands
banner disable
Disables printing banner for all print jobs. Only print the
banner when a
banner enable
Enables printing banner for all print jobs.
binary disable Treats print job as ascii text. Filters out all non-ascii cha-
racters and
binary enable
Treats print job as binary. Sends data byte-for-byte to the
printer.
capture disable
Redirects serial output back to the line.
capture enable
Redirects serial output from the line to this CLI session.
clrscrn
Clears the screen.
convert newline disable
Disables converting single new line and carriage return
characters to
convert newline enable
Enables converting single new line and carriage return
characters to
eoj disable
Disables sending the end-of-job string after each print job.
eoj enable
Enables sending the end-of-job string after each print job.
eoj text binary <binary>
Sets the end-of-job text allowing for binary characters.
eoj text set <text>
Sets the end-of-job text.
exit
Exits to the configuration level.
formfeed disable
Disables the printer from advancing to the next page at
the end of each
formfeed enable Forces the printer to advance to the next page at the end
of each print job.
kill
Ends the current print job on this lpd line.
line <line>
Enters the line level.
lpd <line>
Enters the configure lpd level.
no eoj text
Removes the end-of-job string.
no queue name
Removes the queue name.
no soj text
Removes the start-of-job string.
queue name
<text>
Sets the name of the queue that this lpd line belongs to.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show statistics
Displays statistics and status information for this lpd line.
soj disable Disables sending the start-of-job string after each print
job.
soj enable
Enables sending the start-of-job string after each print job.
soj text binary <binary>
Sets the start-of-job text allowing for binary characters.
soj text set <text>
Sets the start-of-job text.
terminal <line>
Enters the configure-terminal level.
terminal network
Enters the configure-terminal level for the network.
test print <number of lines>
Prints lines of text directly to the lpd line.
tunnel <line>
Enters the tunnel level.