5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 62
disconnect (tunnel-disconnect:1) level commands
Does not watch for a stop character to disconnect.
Watches for a stop character to disconnect.
Returns to the tunnel level.
Does not flush serial data upon closing a tunneling con-
nection.
Flushes serial data buffer when a tunneling connection is
closed.
Does not watch the modem control pin to disconnect.
Watches the modem control pin and disconnects if it is not
asserted.
no timeout Disables disconnect after timeout feature for tunneling
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Disconnects when no data has been received on the line
(serial port) for the
Stores the current configuration in permanent memory.
enable (enable) level commands
Show interface statistics
Continuously show thread runtime information
Show XML Status Record counters
Enters the configure email level.
clear interfaces counters
Zeros interface session counters
clear query port counters
Zeros Query Port counters
Zeros XML Status Record counters
Enters the configuration level.
Show name and number for lines.
Begin session on serial port.
Enters the filesystem level.
Enters the I/O Manager level.
Kills command mode session on the Line
<session>
Kills SSH session with index from "show sessions"
<session>
Kills Telnet session with index from "show sessions"
no clear interfaces counters
Unzeros interface session counters
no clear query port counters
Unzeros Query Port counters
Unzeros XML Status Record counters
Lookup host information for the given host name
Return host information for the given host name
