A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 59
protocol udp aes
Uses UDP protocol with AES encryption for connect mode
tunneling.
reconnect time <milliseconds>
Sets the reconnect time value for tunneling connections
established by the
remote address <text>
Sets the remote host to establish tunneling connections
with.
remote port <number>
Sets the remote port to use for connect mode tunneling.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show status
Displays tunnel connect status.
ssh username <text>
Sets the SSH user name for use when establishing tunne-
ling connections
tcp keep alive <milliseconds>
Enables TCP keep alive for connect mode tunneling and
sets the timer.
write
Stores the current configuration in permanent memory.
connect (tunnel-connect:1) level commands
aes decrypt key <hexadecimal>
Sets the connect tunnel AES decrypt key with up to 16
bytes.
aes decrypt key text <text>
Sets the connect tunnel AES decrypt key with up to 16
bytes.
aes encrypt key <hexadecimal>
Sets the connect tunnel AES encrypt key with up to 16
bytes.
aes encrypt key text
<text>
Sets the connect tunnel AES encrypt key with up to 16
bytes.
block network disable
Forwards (tunnels) network data in connect mode tunne-
ling.
block network enable
Discards all data coming in from the connect mode tunnel
before forwarding
block serial disable
Forwards (tunnels) serial data in connect mode tunneling.
block serial enable
Discards all data coming in from the serial interface before
forwarding
clrscrn
Clears the screen.
connect mode always
Enables the tunneling server to always establish tunneling
connections.
connect mode any character
Enables the tunneling server to establish a tunneling con-
nection when a
connect mode disable
Disables connect mode tunneling.
connect mode modem control asserted
Enables the tunneling server to make tunneling connec-
tions when the modem
connect mode modem emulation
Enables modem emulation for connect mode tunneling.
connect mode start character
Enables connect mode tunneling when the configured
start character
default connect mode
Restores the default connect mode as "disable".
default local port Uses a random port number as the local port for establish-
ing tunneling
default protocol
Restores the default protocol as "TCP".
default reconnect time
Restores the default reconnect time value for connect
mode tunneling.
default tcp keep alive
Restores the default 45 second connect mode TCP keep
alive timeout.