5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 80
incoming connection manual
Wait for an ATA command before answering an incoming
network connection.
Removes optional CONNECT string information for mod-
em emulation.
reassert Asserts tunnel modem status with current configured val-
Uses numeric type responses.
Uses text type responses.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Displays tunnel modem status.
Does not send Modem Response Codes.
Sends Modem Response Codes out on the Serial Line.
Stores the current configuration in permanent memory.
output select (tunnel-connect-output_select:2) level commands
Requires exclusive control of the output for connect mode
connection.
Exits to the next higher level.
Requires exclusive control of the output for connect mode
connection.
Does not require exclusive control of the output for con-
nect mode connection.
no output Discontinues enabling any output while the connect mode
Selects an output to enable while the connect mode con-
nection is up.
Shows the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
output select (tunnel-accept-output_select:2) level commands
Requires exclusive control of the output for accept mode
connection.
Exits to the next higher level.
mode exclusive control Requires exclusive control of the output for accept mode
Does not require exclusive control of the output for accept
mode connection.
Discontinues enabling any output while the accept mode
connection is up.
<text>
Selects an output to enable while the accept mode con-
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
output select (tunnel-connect-output_select:1) level commands
