1.22
Getting started
A. Confirm the Counter for total printed pages
You can confirm the total number of pages you have printed.
Note: It can be different from the number on the optional page counter.
1
Press
MENU
, [Mach Set].
2
Select “A. Page Counter” using the cursor
key. Then press [Enter].
3
The
LCD
shows the total number of pages.
Note: Pressing
RESET
, the machine returns to
standby mode.
B. Protect passcode
When you use the security reception or the department code protect, you need to set
the protect passcode in the machine setting. Regarding the setting of the protect
passcode, see “Security features” in “Fax Reference”.
C. Copy protect
You can set your machine not to use the copy functions. When you set the copy pro-
tect to ON, the machine will not to change to the copy mode even if you press
COPY
.
Note: If it is set to ON, the Fax & Copy feature (see page 2.20 in “Fax Reference”)
and the setting of the paper size are also not available.
1
Press
MENU
, [Mach Set].
2
Select “C. Copy Protect” using the cursor key.
Then press [Enter].
3
Select “ON” or “OFF” using the cursor key. Then press [Enter].
Note: ON: The copy function is not available.
OFF: The copy function is available.
D. Soft Key
In the initial setting, the following functions are registered in the Soft keys; trans-
mission confirmation stamp, security reception, hook/call request, memory
transmission. When you want to set other function into the Soft key, you should set
it in the machine setting. Regarding the setting of the Soft key, see “Soft Key” in
“Fax Reference” or “Copy Reference”.
Machine setting
