Paper exit system: Face down exit system
Printing margin: Upper: 4 mm, Lower: 4 mm, Right: 4 mm, Left: 4 mm
Smoothing print: Yes
Receiving paper tray capacity: 250 sheets
Fax communication
Compatibility: ITU-T Super Group 3, Group3
Modem speed: 33,600, 31,200, 28,800, 26,400, 24,000, 21,600,
19,200, 16,800, 14,400, 12,000, 9,600, 7,200, 4,800,
2,400 bps
Transmission speed: Under 3 seconds per page*
Phone system: Public Switched Telephone Network (PSTN) or
equivalent
Coding method: ITU-T-standard JBIG, MMR and MR, Murata-pro-
prietary MSE.
Scanning resolution: (horizontal × vertical):
Transmission:
Normal 8 dots/mm × 3.85 lines/mm
Fine 8 dots/mm × 7.7 lines/mm
Superfine 16 dots/mm × 15.4 lines/mm**
Grayscale 8 dots/mm × 7.7 lines/mm (Memory Tx)
16 dots/mm × 15.4 lines/mm** (Feeder Tx)
One-touch dial: 78 locations
Speed Dial: 222 locations
Error Correction Mode: Yes
Polling/Broadcasting: 330 locations / 330 locations
Scanning width: A4; 208 mm, B4; 252 mm, A3; 294 mm
Scanning speed: Transmission:
Normal: 0.8 sec/page
Fine: 0.8 sec/page
Super Fine: 1.6 sec/page
Grayscale: 0.8 sec/page (Memory Tx)
Grayscale: 1.6 sec/page (Feeder Tx)
Based on A4-sized sheets.
Grayscale: 256-level
Receive reduction print: Auto (Variable from 100% to 25% by 1% ratio)
Fixed (100%, 97%, 91%, 81% or 75%)
Enlarge transmission: Variable from 100% to 400% by 1% ratio
Copy
Printing resolution: 600 dpi (horizontal) × 600 dpi (vertical)
Warm-up time: 60 sec. or less
First Copy Output Time: 5.4 sec. (Based on A4 )
Print speed: 25 ppm (Based on A4 )
Multiple copies: 1 to 99 copies
Scanning resolution: 600 dpi or 400 dpi
Copy reduction/enlargement: Variable from 25% to 400% by 1% ratio
Fixed (141%, 122%, 115%, 86%, 81%, 70%)
Scanning speed: 600 dpi: 2.5 sec/page
400 dpi: 1.7 sec/page
Based on A4-sized sheets.
* Based on transmission of ITU-T Test Document 1 to a Muratec fax machine.Your transmission times will vary,
but your fax machine always will provide the fastest transmission speeds possible under ITU-T guidelines and
phone-line conditions.
** In the case that the remote fax has the ability of “16 dots/mm × 15.4 dots/mm”.
If not, the superfine resolution is “8 dots/mm × 15.4 dots/mm”, and the grayscale resolution in feeder transmission
is “8 dots/mm × 7.7 dots/mm”.
Appendix and index
AI
.2
