Symbol and terms (Operating tips)
In this manual, the following symbols and terms are used, and make sure you know
what they mean.
CAUTION This symbol indicates how to avoid personal injury.
Important: This instruction describes conditions or incorrect operations that
could cause damage to your machine.
Note: A note describes helpful hints, restrictions, or how to avoid diffi-
culties.
[ ] Keys that appear at the lower parts on the
LCD
. To press this key,
use the item select key.
“ ” Items that appear on the
LCD
.
BOLD WORDS
Keys built into the machine’s operation panel.
LCD
The Liquid Crystal Display. It shows the machine’s status, error
messages and function menu, etc.
Document A document is the original sheet(s) of paper you send or copy on
your machine.
Paper A paper is the recording paper for printing.
, It means that the direction of the document or paper. See “About
and symbol” next column.
<Operating tips>
Here’s an example. If we say “press
MENU
,
J
, 0, 7, [Enter]”…
… you’d press
MENU
… then J
… then 0 (the numeric key zero)
… then 7
… and then Item select key correspond to [Enter].
Important: Even though our example above includes commas, do not enter them
into the machine. Those characters appear in our instructions to sepa-
rate one number from the other. They do not need to be entered into
your machine.
About and symbol
and symbol indicates the direction of your document or recording paper.
When the document or paper has a width longer than its length, we use symbol .
When the document or paper has a width shorter than its length, we use symbol .
vi
