Just in case …
2.2
If a printout jams
If a printout jam occurred during printing, an alarm sounds and the part the paper
jammed will blink on the
LCD
. Please remove the jammed paper carefully as below.
CAUTION: The fuser unit becomes very hot. Do not touch the fuser unit
when you are removing a paper jam.
Important: Do not touch the electrical contacts
inside the printer cover and under the
drum cartridge, as an electrostatic dis-
charge may damage the machine.
Side cover
When the side cover part is blinking on
LCD
:
1
Open the side cover and the clear
cover.
2
Remove the jammed paper.
When using the optional Large capacity cassette:
Turn the green dial as the arrow indicates and remove the jammed paper.
3
Close the side cover.
4
Pull the cassette toward you and
remove the papers in the cassette.
5
Reset the papers into the cassette
and close the cassette.
