Chapter 6 Configuration Basics
ZyWALL USG 300 User’s Guide
103
6.5.7 Static Routes
Use static routes to tell the ZyWALL about networks not directly connected to the
ZyWALL.
6.5.8 Zones
See Section 6.2 on page 92 for background information. A zone is a group of
interfaces and VPN tunnels. The ZyWALL uses zones, not interfaces, in many
security settings, such as firewall rules and remote management.
Zones cannot overlap. Each interface and VPN tunnel can be assigned to at most
one zone. Virtual interfaces are automatically assigned to the same zone as the
interface on which they run. When you create a zone, the ZyWALL does not create
any firewall rules, assign an IDP profile, or configure remote management for the
new zone.
Example: For example, to create the DMZ-2 zone and add ge7, click Network >
Zone and then the Add icon.
6.5.9 DDNS
Dynamic DNS maps a domain name to a dynamic IP address. The ZyWALL helps
maintain this mapping.
6.5.10 NAT
Use Network Address Translation (NAT) to make computers on a private network
behind the ZyWALL available outside the private network.
MENU ITEM(S)
Configuration > Network > Routing > Static Route
PREREQUISITES
Interfaces
MENU ITEM(S)
Configuration > Network > Zone
PREREQUISITES
Interfaces, IPSec VPN, SSL VPN
WHERE USED
Firewall, IDP, remote management, anti-virus, ADP, application patrol
MENU ITEM(S)
Configuration > Network > DDNS
PREREQUISITES
Interface