Chapter 13 Troubleshooting
WAP3205 v2 User’s Guide
114
13.2 WAP3205 v2 Access and Login
I don’t know the IP address of my WAP3205 v2.
1 The default IP address is 192.168.1.2.
2 If you changed the IP address and have forgotten it,
• and your WAP3205 v2 is a DHCP client, you can find your IP address from the DHCP server. This
information is only available from the DHCP server which allocates IP addresses on your network.
Find this information directly from the DHCP server or contact your system administrator for
more information.
• reset your WAP3205 v2 to change all settings back to their default. This means your current
settings are lost. See Section 13.4 on page 116 in the Troubleshooting for information on
resetting your WAP3205 v2.
I forgot the password.
1 The default password is 1234.
2 If this does not work, you have to reset the device to its factory defaults. See Section 13.4 on page
116.
I cannot see or access the Login screen in the Web Configurator.
1 Make sure you are using the correct IP address.
• The default IP address is 192.168.1.2.
• If you changed the IP address (Section 11.4 on page 102), use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I
don’t know the IP address of my WAP3205 v2.
2 Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
Start Guide.
3 Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
enabled. See Appendix A on page 119.
4 Make sure your computer is in the same subnet as the WAP3205 v2. (If you know that there are
routers between your computer and the WAP3205 v2, skip this step.)
• If there is a DHCP server on your network, make sure your computer is using a dynamic IP
address. See Section 11.4 on page 102.
• If there is no DHCP server on your network, make sure your computer’s IP address is in the
same subnet as the WAP3205 v2. See Appendix B on page 129.
