Chapter 4 Client Mode
WAP3205 v2 User’s Guide
31
4.7 Site Survey Screen
Use this screen to scan for and connect to a wireless network automatically. Go to Configuration >
Wireless LAN > Site Survey to open the following screen.
Figure 16 Client Mode: Wireless LAN > Site Survey
The following table describes the labels in this screen.
Apply Click Apply to save your changes back to the WAP3205 v2.
Back Click Back to go back to the previous screen.
Table 11 Client Mode: Wireless LAN > Profile: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
Table 12 Client Mode: Wireless LAN > Site Survey
LABEL DESCRIPTION
Station Site Survey
# Select a wireless device and click Add Profile to open a configuration screen where you
can add the selected wireless device to a profile and then enable it.
SSID This displays the SSID of the wireless device.
indicates the wireless device is added to an activated profile and the WAP3205 v2 is
connecting to it.
BSSID This displays the MAC address of the wireless device.
Signal Strength This displays the strength of the wireless signal. The signal strength mainly depends on the
antenna output power and the distance between your WAP3205 v2 and this device.
Channel This displays the channel number used by this wireless device.
Encryption This displays the data encryption method used by this wireless device.
Authentication This displays the authentication method used by this wireless device.
Network Type This displays the network type (Infrastructure or Ad Hoc) of this wireless device.
Rescan Click this button to search for available wireless devices within transmission range and
update this table.
Add Profile Select a wireless device and click this button to add it to a profile.
