Chapter 7 Connection Wizard
WAP3205 v2 User’s Guide
54
The following table describes the labels in this screen.
Wireless Security: WPA-PSK/WPA2-PSK
Choose WPA-PSK or WPA2-PSK security in the Security mode field to set up a password for
your wireless network.
Figure 38 Wireless Security: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Table 25 Wireless Security: No Security
LABEL DESCRIPTION
Wireless
Network Name
(SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the WAP3205 v2, make sure all wireless clients use the same
SSID in order to access the network.
Security mode Select a security level from the drop-down list box.
Choose None to have no wireless LAN security configured. If you do not enable any wireless
security on your WAP3205 v2, your network is accessible to any wireless networking device
that is within range.
Exit Click this to close the wizard screen without saving.
Back Click this to return to the previous screen.
Next Click this to continue.
Table 26 Wireless Security: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
Wireless
Network Name
(SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the WAP3205 v2, make sure all wireless stations use the same
SSID in order to access the network.
Security mode Choose WPA-PSK or WPA2-PSK security to configure a Pre-Shared Key. Choose this
option only if your wireless clients support WPA-PSK or WPA2-PSK respectively.
Wireless
password
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure wireless
connection by configuring WPA in the wireless LAN screens.
Verify Password
Retype the password to confirm.
