WAP3205 v2 User’s Guide 59
CHAPTER 8
Tutorials
8.1 Overview
This chapter provides tutorials for your WAP3205 v2 (in access point or universal repeater mode) as
follows:
• Connecting to the Internet from an Access Point
• Configuring Wireless Security Using WPS
• Enabling and Configuring Wireless Security (No WPS)
• Using Multiple SSIDs on the WAP3205 v2
• Connecting the WAP3205 v2 (in Universal Repeater Mode) to an AP or Wireless Router
This chapter provides tutorials for your WAP3205 v2 (in client mode) as follows:
• Connecting the WAP3205 v2 (in Client Mode) to an AP or Wireless Router
8.2 Connecting to the Internet from an Access Point
This section gives you an example of how to set up an access point (AP) and wireless client (a
notebook (B), in this example) for wireless communication. B can access the Internet through the
access point (A) wirelessly.
Figure 45 Wireless Access Point Connection to the Internet
8.3 Configuring Wireless Security Using WPS
This section gives you an example of how to set up wireless network using WPS. This example uses
the WAP3205 v2 as the AP and NWD-211AN as the wireless client which connects to a notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter
or PCI card).
