A SERVICE OF

logo

Open as PDF
next previous
Chapter 8 Tutorials
WAP3205 v2 User’s Guide
61
Figure 46 Example WPS Process: PBC Method
8.3.2 PIN Configuration
When you use the PIN configuration method, you need to use both WAP3205 v2’s configuration
interface and the client’s utilities.
1 Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method
to get a PIN number.
2 Enter the PIN number to the PIN field in the Network > Wireless LAN > WPS Station screen on
the WAP3205 v2.
3 Click Start buttons (or button next to the PIN field) on both the wireless client utility screen and the
WAP3205 v2’s WPS Station screen within two minutes.
The WAP3205 v2 authenticates the wireless client and sends the proper configuration settings to
the wireless client. This may take up to two minutes. Then the wireless client is able to
communicate with the WAP3205 v2 securely.
The following figure shows you how to set up wireless network and security on WAP3205 v2 and
wireless client (NWD-211AN in this example) by using PIN method.
Wireless Client
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES
AP