Chapter 9 Monitor
WAP3205 v2 User’s Guide
81
Figure 53 Summary: Packet Statistics
The following table describes the labels in this screen.
9.5 WLAN Station Status
Click the WLAN Station Status (Details...) hyperlink in the Status screen or Monitor > WLAN
Station Status. View the wireless stations that are currently associated to the WAP3205 v2 in the
Association List. Association means that a wireless client (for example, your network or computer
with a wireless network card) has connected successfully to the AP (or wireless router) using the
same SSID, channel and security settings.
Note: This screen is not available when the WAP3205 v2 is in Client mode.
Table 28 Summary: Packet Statistics
LABEL DESCRIPTION
Port This is the WAP3205 v2’s port type.
Status For the LAN ports, this displays the port speed or Down when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled
and Down when the WLAN is disabled.
TxPkts This is the number of transmitted packets on this port.
RxPkts This is the number of received packets on this port.
Collisions This is the number of collisions on this port.
Tx B/s This displays the transmission speed in bytes per second on this port.
Rx B/s This displays the reception speed in bytes per second on this port.
Up Time This is the total time the WAP3205 v2 has been for each session.
System Up Time This is the total time the WAP3205 v2 has been on.
Poll Interval(s) Enter the time interval in seconds for refreshing statistics in this field.
Set Interval Click this button to apply the new poll interval you entered in the Poll Interval(s)
field.
Stop Click Stop to stop refreshing statistics.
