Filter
Top Products
2-42-4
2-42-4
2-4
Chapter 2: Basic installationChapter 2: Basic installation
Chapter 2: Basic installationChapter 2: Basic installation
Chapter 2: Basic installation
4. Lift the cover to expose the
internal components of your
system.
3. Firmy grip the top handle and
push the cover about 1 cm
forward.
2.4 Removing the cover
To remove the cover:
1. On the rear panel, locate the
thumbscrew that secures the
cover to the chassis.
2. Turn the thumbscrew
counterclockwise unti it gets
loose.
The thumbscrew cannot be
removed from the chassis.
When fully open, the cover
remains tilted at an angle of
about 35º. Do not push
down further to prevent
damage to the system.
The cover does not
completely disengage from
the chassis.