Filter
Top Products
2-152-15
2-152-15
2-15
ASUS S-pressoASUS S-presso
ASUS S-pressoASUS S-presso
ASUS S-presso
5. Connect a power cable from
the power supply unit to the
power connector at the back
of the optical drive.
6. Connect one end of the IDE
ribbon cable to the IDE
interface at the back of the
optical drive, matching the red
stripe on the cable with Pin 1
on the IDE interface.
7. Connect one end of the optical
drive audio cable to the 4-pin
connector at the back of the
optical drive.
8. Connect the other end of the
IDE ribbon cable to the
secondary IDE connector
(black connector labeled
SEC_IDE) on the motherboard.
See page 3-8 for the location
of the secondary IDE
connector.
9. Connect the other end of the
audio cable to the 4-pin CD1
connector on the
motherboard. See page 3-8 for
the location of the CD audio
connector.
5
6
7