Filter
Top Products
4-204-20
4-204-20
4-20
Chapter 4: BIOS informationChapter 4: BIOS information
Chapter 4: BIOS informationChapter 4: BIOS information
Chapter 4: BIOS information
DRAM RAS# to CAS# Delay [4 Clocks]
This item controls the latency between the DDR SDRAM active
command and the read/write command.
Configuration options: [4 Clocks] [3 Clocks] [2 Clocks]
DRAM Precharge Delay [8 Clocks]
Configuration options: [8 Clocks] [7 Clocks] [6 Clocks] [5 Clocks]
DRAM Burst Length [8 Clocks]
Configuration options: [4 Clocks] [8 Clocks]
Internal Graphic Accelerate Mode [Auto]Internal Graphic Accelerate Mode [Auto]
Internal Graphic Accelerate Mode [Auto]Internal Graphic Accelerate Mode [Auto]
Internal Graphic Accelerate Mode [Auto]
Allows you to select the internal graphic acceleration mode.
Configuration options: [2T] [1T] [Auto]
Graphic Adapter Priority [AGP/Int-VGA]Graphic Adapter Priority [AGP/Int-VGA]
Graphic Adapter Priority [AGP/Int-VGA]Graphic Adapter Priority [AGP/Int-VGA]
Graphic Adapter Priority [AGP/Int-VGA]
This option allows you to select the graphics controller to use as primary
boot device. Configuration options: [Internal VGA] [AGP/PCI] [PCI/AGP]
[PCI/Int-VGA]
Onboard Video Memory [Enabled, 8MB]Onboard Video Memory [Enabled, 8MB]
Onboard Video Memory [Enabled, 8MB]Onboard Video Memory [Enabled, 8MB]
Onboard Video Memory [Enabled, 8MB]
Allows you to set the size of the onboard video memory.
Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 4MB]
[Enabled, 8MB] [Enabled, 16MB] [Enabled, 32MB]
Graphics Aperture Size [64MB]Graphics Aperture Size [64MB]
Graphics Aperture Size [64MB]Graphics Aperture Size [64MB]
Graphics Aperture Size [64MB]
Allows you to select the mapped memory for AGP graphic data.
Configuration options: [4MB] [8MB] [16MB] [32MB] [64MB] [128MB]
[256MB]
Boot Display Device [Auto]Boot Display Device [Auto]
Boot Display Device [Auto]Boot Display Device [Auto]
Boot Display Device [Auto]
Allows you to select the boot display device.
Configuration options: [Auto] [CRT] [TV] [EFP] [LFP] [CRT+EFP]
[CRT+LFP]
Flat Panel Display [640x480LVDS]Flat Panel Display [640x480LVDS]
Flat Panel Display [640x480LVDS]Flat Panel Display [640x480LVDS]
Flat Panel Display [640x480LVDS]
Allows you to select the flat panel display resolution when you selected
LCD Flat Panel [LFP] as your boot display device.
Configuration options: [640x480LVDS] [800x600LVDS] [1024x768LVDS]
[1280x1024LVDS] [1400x1050LVDS] [1600x1200LVDS]
[640x480CMOS] [800x600CMOS] [1024x768CMOS] [1280x1024CMOS]
[1400x1050CMOS] [1600x1200CMOS]