Filter
Top Products
5. Advanced operation
To enable/disable hibernation on your display:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Power Management menu.
3. Enter the Hibernate submenu.
4. Select Enabled/Disabled as desired and confirm.
To specify th e hibernate timeout:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Power Management menu.
3. Enter the Hibernate Timeout submenu.
4. Set the timeout value as desired and confirm.
5.12 Luminanc e target
About the luminance target
The luminance target of your Coronis Fusion 6MP is adjustable over a predefined range. When you
change the luminance target, the display will adjust its backlight to reach the t arget.
To set the luminance target:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration menu.
3. Enter the Luminance Target submenu.
4. Set a luminance target value as desired and confirm.
The default value is 450 cd/m². The five year warranty is valid for this setting.
5.13 Color presets
About color presets
The available color preset settings for your display are:
Clearbase Simulation of the clearbase film color temperature.
Bluebase
Simulation of the bluebase film color temperature.
User When selecting the User color t emperature setting,
youwillbeabletomanuallydefine the X and Y
coordinates or the display color temperature in
separate submenus.
Native White
The native, unmodified color temperature of the
LCD panel.
To select a color preset:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration > Color Settings menu.
K5902055 CORONIS FUSION 6MP 28/08/2013
23